NBE-5AC-GEN2 Ubiquiti Wireless IP bridge 5GHZ 15KM

NBE-5AC-GEN2 Ubiquiti Wireless IP bridge 5GHZ 15KM
Ubiquiti NBE-5AC-Gen2 NanoBeam AC Outdoor 5GHz 19dBi WiFi Point-to-Point Link (450Mbps AC)
(to achieve the maximum transmission distance the unit must be installed in a environment without any influences on the wireless signal,
the units will have to be installed and aligned in accordance to the manufacturers installation instructions
PLEASE ADD QTY 2 TO COMPLETE YOUR PROJECT
2 Required - If you would like both to be pre configured to work with the Hikvision Ports on the NVR then you will need to adjust the quantity to 2
If you want only one (Transmission or receiver please keep the quantity as one and give us a ring stating your order number and whether you would like only transmission or receiver.
Superior Processing
Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Incredible Antenna "Beam" Performance
The form factor of the NanoBeam® AC features the highest gain for its size. The NanoBeam AC's excellent beam directivity provides the best performance in high-noise environments.
Performance Breakthrough
airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.
Advanced Software Technology
Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Plug and Play Installation
The NanoBeam AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting.
Technical Specification
Ubiquiti NBE-5AC-Gen2 NanoBeam AC Outdoor 5GHz 19dBi WiFi Point-to-Point Link (450Mbps AC)
General |
|
---|---|
Device Type | Wireless bridge |
Ruggedized Design | Outdoor |
Width | 18.9 cm |
Depth | 12.5 cm |
Height | 18.9 cm |
Weight | 530 g |
Processor / Memory / Storage |
|
Processors Installed | 1 x Atheros MIPS 74KC 720 MHz |
Max Supported Qty | 1 |
RAM | 128 MB DDR2 SDRAM |
Flash Memory | 8 MB |
Networking |
|
Form Factor | External |
Connectivity Technology | Wireless |
Data Link Protocol | AirMax ac |
Network / Transport Protocol | DHCP |
Frequency Band | 5 GHz |
Status Indicators | Power, WLAN, LAN |
Features | Manageable, wall mountable, pole mountable, 24KV ESD Protector, management Wi-Fi radio |
Aerial |
|
Antenna | Internal |
Directivity | Directional |
Gain Level | 19 dBi |
Expansion / Connectivity |
|
Interfaces | 1 x 1000Base-T (PoE) - RJ-45 |
Miscellaneous |
|
Included Accessories | Pole mount |
Compliant Standards | IC, FCC, RoHS, IEC 60068-2-6, IEC 60068-2-14, ETSI 300 019, MIL-STD 810G 506.5, IEC 60068-2-11, MIL-STD 810G 509.5 |
Power |
|
Power Over Ethernet (PoE) Supported | PoE |
Power Device | Power injector |
Power Consumption Operational | 8.5 Watt |
Software / System Requirements |
|
OS Provided | AirOS |
Manufacturer Warranty |
|
Service & Support | Limited warranty - 1 year |
Environmental Parameters |
|
Min Operating Temperature | -40 °C |
Max Operating Temperature | 80 °C |
Humidity Range Operating | 5 - 95% (non-condensing) |