Hikvision DS-K1T671TM-3XF Face Recognition Terminal - Elevated skin surface detection (Offer)

Hikvision DS-K1T671TM-3XF Face Recognition Terminal - Elevated skin surface detection (Offer)

The Hikvision DS-K1T671TM-3XF Face Recognition & Temperature-Screening Terminal is an access control instrument capable of measuring skin-surface temperatures. It is a security and temperature-screening solution that is suitable for implementation in schools, campuses, businesses, factories and stations.

To enable card and facial recognition as well as temperature-screening, the Hikvision DS-K1T671TM-3XF Face Recognition & Temperature-Screening Terminal features a 7 LCD display, 2MP wide-angle lens, built-in card reader, extensive onboard storage, and a Vanadium Oxide uncooled sensor. Please see the video below for a brief introduction to Hikvision DS-K1T671TM-3XF Face Recognition & Temperature-Screening Terminal and an overview of its applications. 

Features

• Supports Vanadium Oxide uncooled sensor to measure target's temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
• Recognition distance: 0.5 to 1.5 m
• Fast temperature measurement mode: Detects face and takes temperature without identity authentication
• Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
• Displays temperature measurement results on the authentication page
• Triggers voice prompt when detecting abnormal temperature
• Configurable door status (open/close) when detecting abnormal temperature
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
• Face recognition duration 0.2 s/User; face recognition accuracy rate 99%
• 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
• Suggested height for face recognition: between 1.4 m and 1.9 m
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
  * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

Stand Specification - DS-DM0701BL

Table stand for DS-K1T671TM-3XF

Dimensions: 193 mm × 353.5 mm × 195.5 mm (7.6" × 14.3 × 7.7)

Weight: 2.2 ± 0.5Kg (4.85 ± 1.1lb)