24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch
24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch
24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch
24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch
CCTV Wholesale

24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch

Share Compare Get help

Ask a Question

* Required fields

Size guide
Download PDF
24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch

24-Port DS-3E1326P-SI Hikvision Smart Managed 24-Port 100 Mbps PoE Switch

Regular price £169.00
Sale price £169.00 Regular price
Unit price
Information
Information

Switch

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.


 Key Feature

-  24 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.
-  IEEE 802.3at/af standard for PoE ports.
- Network topology management, alarm push, network health monitor.
-  6 KV surge protection for PoE ports.
-  AF/AT camera can reach up to 300 m in extend mode.

Specification

  • General
  • ShellMetal material
  • Net Weight2.83 kg (6.24 lb)
  • Gross Weight3.33 kg (7.34 lb)
  • Dimensions (W × H × D)440.00 mm × 44.00 mm × 221.00 mm (17.32'' × 1.73'' × 8.70'')
  • Operating Temperature0 °C to 45 °C (0 °F to 113 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100-240 VAC, 50/60 Hz, Max. 6.5 A
  • Installation ModeRack (equipped with mounting ears)
  • Max. Power Consumption400 W
  • Power Consumption in Idle10 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports24 × 10/100 Mbps PoE port,2 × Gigabit combo
  • MAC Address Table16 K
  • Switching Capacity14.8 Gbps
  • Packet Forwarding Rate11.01 Mpps
  • Internal Cache4 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-);
  • PoE PortPoE: Ports 1 to 24
  • Max. Port Power30 W
  • PoE Power Budget370 W
  • Software Function
  • Long Range

    Ports 1 to 24: up to 300 m.

    Long range performance may vary depend on camera model or cable condition.

  • Port Isolation

    Ports 1 to 24: port isolation mode to improve network security.

    Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
  • QoS

    QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.

    Support port-based priority configuration.

    Support SP, WRR priority schedule mode.

  • Loop Prevention

    Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

    Support 802.1D STP.

    Suppport 802.1w RSTP.

  • VLAN

    VLAN is used for network scale planning and network health improvement.

    Support 802.1Q.

    Configurable VLAN ID from 1-4094.

    Support Trunk, Access port mode.

    Support Max. 4094 VLAN.

  • HPP

    Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display topology information.

    4. Display the alarm status.

    5. Restart ports and devices.

    6. Remotely upgrade the device.

  • System MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Storm Control

    Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.

    Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

  • Approval
  • EMC

    FCC (47 CFR Part 15, Subpart B);

    CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);

    IC (ICES-003: Issue 6);

    RCM (ASNZS CISPR 32: 2015)

  • Safety

    UL (UL 60950-1);

    CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);

    CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

  • Chemistry

    CE-RoHS (201165EU);

    WEEE (201219EU);

    Reach (Regulation (EC) No.19072006)

Related Products

Shopping Cart

Your cart is currently empty.